DiamonDyze™ is a break through in colored and hard anodizing.  The advanced ceramic formulation provides the applicator with the ability to color anodize parts AND impart extreme  wear,  thermal,  chemical and corrosion resistance in one simple  step.

Colored anodizing has several advantages compared to hard anodizing.  It uses less hazardous materials, uses less energy and provides a smoother, less porous surface with good chemical and corrosion resistance.  However until now the only way to have extreme wear resistance was to turn to hard anodizing.  Hard anodizing does create a very hard and durable surface but at the expense of the qualities that make colored anodizing so popular.  NOW  DiamonDyze™  combines the best features of both.

DiamonDyze™ is simply added at the step where color would normally be imparted to a part undergoing the anodizing process.  DiamonDyze™ replaces standard colored dyes in the process line.  That is it.  The end result is a part that can be produced in any standard color available, including shades made by mixing the colors.  DiamonDyze™ then increases the chemical and corrosion protection AND adds extreme wear resistance as well as increased thermal resistance. 

DiamonDyze™ can be applied to almost any aluminum part that normally can be anodized.  This would include pistons, Aluminum Cylinder heads, Aluminum Rocker Arms, Intake Manifolds, Turbo Intake Housings, Shock Absorbers, Trailing Arms, and Aluminum Cylinder Sleeves to name just a few.  This last item is extremely important as until now the traditional hardening process for aluminum cylinder sleeves/bores has been extremely expensive and is available at only a few locations.

All licensed applicators will receive training at their shop at this time, to assure that the process is properly understood and that the proper procedures are followed.  While adding an anodizing line to a business capability will require an investment in the needed equipment, the cost including training will be comparable to the cost of installing the equipment needed to finish parts with metallic ceramic coatings.  The return on the investment will be well worth the effort.

Existing Anodizing Shops, Machine Shops, Coating Applicators and Manufacturers will all benefit from this New and Advanced Technology.