Welcome to Techlines... November 2006
XTREME
RC CAR
MAGAZINE
The magazine used product 3401 (WSX) to coat some driveline parts in a radio controlled car. These are two stroke engines and rev to 38,000+ rpms. They picked up over 4 tenths of a second per lap lubricating the drive train. More importantly they stressed that parts won't wear out nearly as fast, more than paying for the cost of the product.
PROCESS COATINGS
FLORIDA
Doug passed on the following tip.
When mixing a coating using a blender, check that there is no material left under the blades near the shaft. There is a potential for material to be trapped there and not blend. Doug ran into this problem when he started getting what appeared to be “grit” in the coating as he sprayed it. He checked the area and saw that some material may not have been blending. He “pulsed” the blender with the coating in it and it picked up the coating and dispersed it into the mix. The application went just fine after that fix.
Occasionally we get reports of “grit” in the coating. When we check material that has been returned we do not find any grit present and the coatings sprays fine. The suggestion above may well explain some of these calls, as we use a dispersion blade to blend the material when testing. Any shop experiencing the “problem” may be using a blender and Doug’s experience seems to provide the solution. We always appreciate such tips from our Applicators, as they help everyone.
PRI
Trade Show
We are hoping to meet many of our customers at the show this year. If you have not arranged to go, there is still time. Give PRI (Performance Racing Industry) a call at 1-949-499-5413 to get information. The show is being held in Orland, FL December 14-16, 2006.
We will be in booth #2601 peninsula and will have a variety of new products on display. IF you are attending the show be sure to stop by and see the new products on display. A new ColorGard high heat coating is available and will polish to a very bright Stainless Steel appearance. This product will be available in retail packaging. New catalogs and other information will be available. Be sure to stop by and say hello.
YOU Can Run With The BEST OR Run With The Rest™
Site design by AndComp Technologies www.andcomp.com
Copyright 2000 Tech Line Coatings, Inc.
|