Retail Packaged
TECH LINE makes available a full range
of power enhancing coatings for internal engine parts that can be applied
at home. These coatings are the same products being applied by professional
coating shops and give the individual the opportunity to benefit from
this advanced technology at a cost and time savings. For those who do
not wish to do their own coating work, or wish to have TECH LINE specialty
coatings applied, hundreds of professional coating shops worldwide apply
TECH LINE coatings.
INCREASE TORQUE AND HORSEPOWER,
INCREASE PART LIFE, REDUCE FRICTION AND WEAR
******************
View our Suggested Retail Price List Here
******************
Headquarters and Western Warehouse Customer Service/ Sales/Tech Line: |
DFL-1 POWERKOTE (Dry Film Lubricant)
DFL-1 7 oz.
-
High pressure lubricant
- Reduces friction, galling and scuffing. Increases part life
- Requires no clearance changes to compensate for the coating
- Apply to any part subject to sliding or rotating friction
- Excellent for use on bearings
- Water based no hazardous fumes
- Requires baking. Cures at 300f minimum. Must be oven cured
CBC1 POWERKOTE (Cermet Coating Thermal barrier)
Part #
CBC-1 3oz.
Retail
packaged version of CBC2/CBX
- Designed for Performance engines.
- Thermal barrier coating
- Reduce part temperature.Keeps heat in combustion chamber longer through the power stroke
- Increase torque and H.P. Increase combustion chamber efficiency
- Reduce fuel consumption
- Water based no hazardous fumes, non flammable
- Requires baking. Cures at 300f for 1 hour. Must be oven cured
PKSX POWERKOTE (Lubricant)
Part #
PKSX 1 oz.
Designed
for cylinder walls, lifter bores and valve guides
- Extreme pressure and temperature lubricant
- Can carry loads up to 350,000 psi
- Requires NON BAKING, simply buff on
- Reduces friction and wear, improves ring seal and leak down
- Bonds at 20 millionth of an inch
Site design
by AndComp Technologies www.andcomp.com
Copyright 2000 Tech Line Coatings, Inc.