Bulk and Shop-Only



TECH LINE makes available a full range of power enhancing coatings for internal engine parts that can be applied at home. These coatings are the same products being applied by professional coating shops and give the individual the opportunity to benefit from this advanced technology at a cost and time savings. For those who do not wish to do their own coating work, or wish to have TECH LINE specialty coatings applied, hundreds of professional coating shops worldwide apply TECH LINE coatings..

Headquarters and Western Warehouse
TECH LINE COATINGS,INC.
26844 Adams Ave.
Murrieta, CA 92562


Central Warehouse
Midlothian, TX

Customer Service/ Sales/Tech Line:
1-972-775-6130

Fax: 1-972-775-8125

www.techlinecoatings.com
info@techlinecoatings.com

  Cermalube(TM) Ceramic Lubricant  

Part #
QT. 33032
Gallon  33028


CermaLube is a ceramic coating, designed to be used, on any rigid or semi rigid surface experiencing sliding, rotating or oscillating friction. CermaLube is designed to carry loads in excess of 350,00 PSI as well as lubricate at temperatures in excess of 1600f. CermaLube is a combination of a unique water based ceramic resin and lubricating solids including, a ceramic lubricating frit. CermaLube combines the durability of a ceramic resin with the lubricity of the ceramic lubricant. CermaLube works well in light duty applications as well as in applications where high temperatures, high loads and high speeds are experienced. When higher temperatures, than most other types of coatings can provide protection at, are experienced, CermaLube is fully capable of carrying the load. CermaLube is gray in color and acquires a glass like finish in use. CermaLube is formulated to provide a cured film thickness of .001" or less. CermaLube is a water based material that contains no hazardous solvents.

  • PROTECTIVE TO ABOVE 1600F
    • Maintains adhesion at base metal temperatures in excess of 1600f.
  • HIGHLY RESISTANT TO THERMAL SHOCK
    • Survives cyclic heating and cooling.
  • DURABLE SEMI-RIDGID
    • Creates a hard, semi rigid, ceramic like finish that survives impact, as well as expansion and contraction without separating from the base metal.
  • HIGH LOAD CAPABILITY
    • Lubricating pigments are capable of carrying loads in excess of 350,000 PSI.
  • CORROSION AND CHEMICAL RESISTANT
    • Resistant to most chemicals and acids while inhibiting oxidation.
    •

CermaLube is a unique water based system that cures at 350f for 1 hour, at temperature. Material cleans up easily before curing with water. Non flammable system with no V.O.C.'s ( volatile organic compounds ) is compatible with today's emphasis on environmentally friendly products. CermaLube may be used on all metals except magnesium.

CBC2 POWERKOTE (Cermet Coating Thermal barrier)

 

 

 

Part #
3oz.  2203

  • Combustion chamber coating for all metals
  • Thermal barrier
    •
  • Reduce part temperature. Keeps heat in combustion chamber longer, through the power stroke
  • Increase torque and H.P. Increase combustion chamber efficiency
  • Reduce fuel consumption
  • Covers approximately 24 pistons
  • Water based no hazardous fumes, non flammable
  • Requires baking. Cures at 350f for 1 hour. Must be oven cured

Note use CBX below if using nitrous oxide, supercharged, or turbo charged.

CBX POWERKOTE (Cermet Coating Thermal barrier)

 

 

 

Part #
 3 oz. 2253

  • Designed for Performance engines running; Nitrous oxide, Supercharged or Turbocharged. For all other applications use CBC2
  • Creates a hard surface specifically designed for engines running High volumes of fuel and/or high compression ratios
  • Thermal barrier coating 
    •
  • Reduces part temperature. Keeps heat in combustion chamber longer through the power stroke
  • Increase torque and H.P.  Increase combustion chamber efficiency
  • Reduce fuel consumption
  • Water based no hazardous fumes, non flammable

    Requires baking. Cures at 350f for 1 hour. 
    Must be oven cured

DFL-1 POWERKOTE (Dry Film Lubricant)

Part #
7 oz. 2107
QT. 2132

  • High pressure lubricant
  • Reduces friction, galling and scuffing. Increases part life
  • Requires no clearance changes to compensate for the coating
  • Apply to any part subject to sliding or rotating friction
  • Excellent for use on bearings
  • Water based no hazardous fumes
  • Requires baking.  Cures at 300f minimum. Must be oven cured
    •

TLML DRY FILM LUBRICANT

Part #
QT. 3032
Gallon  3028
  • Extreme pressure bonded lubricant
  • Solvent based, can be sprayed in very thin films
  • Reduces friction, galling and scuffing. Increase part life
  • Requires no clearance changes to compensate for coating
  • Oil retaining
  • Aids in cooling parts
  • Requires baking. Cures at 300f minimum. Must be oven baked
    •

TLML2 DRY FILM LUBRICANT

Part #
QT. 3042
Gallon  3048
  • Has the same qualities as listed above for TLML
  • Softer coating, burnishes very easily
  • Use as a top coat for TLMB
  • Excellent for crankshaft journals
  • Use on parts where no liquid lubricant will be used
  • Requires baking. Cures at 300f minimum. Must be oven baked

TLMB HIGH LOAD DURABLE LUBRICANT

Part #
 QT. 3732
Gallon  3728
  • Primarily used to build up piston skirts
  • Used in very high RPM engines or where very long rods are run
  • Top coat with either TLML2,TLML or WSX
  • Requires baking. Cures at 300f minimum. Must be oven baked

WSX POWERCOAT LUBRICANT

Part #
 Quart  3401
Gallon  3408
  • Designed for cylinder walls, lifter bores and valve guides
  • Extreme temperature and pressure lubricant
  • Reduces friction and wear
  • Bonds at 20 millionth of an inch thick
    •
  • Requires NO Baking, Simply buff on.

TLTD THERMAL DISPERSANT

Part #
 Quart  3132
Gallon  3128

  • Rapidly disperses heat away from a coated component
  • More evenly distributes heat over a coated surface
  • Aids in cooling heat sensitive parts
  • Excellent for intake manifolds, brake components, oil pans etc…
  • Very good chemical and corrosion resistance
  • Black in color
  • Cosmetically appealing
    •
  • Requires baking. Cures at 300f minimum. Must be oven baked

TLLB LUBRICATED THERMAL BARRIER

Part #
 Quart  3232
Gallon  3228

  • Oil shedding thermal barrier
  • Designed for the bottom of intake manifolds
  • Use on windage trays, crank scrapers, connecting rods etc…
  • Requires baking. Cures at 300f minimum. Must be oven baked

TLHB HI HEAT I.D. COATING

Part #
 Quart  3332
Gallon  3328

  • Modified Polymer
  • Designed for the I.D. of chrome pipes to reduce bluing
  • Excellent thermal barrier for exhaust ports
  • Smooth finish enhances flow in exhaust ports
  • May be flowed, brushed, sponged or sprayed
  • Requires baking. Cures at 300f minimum. Must be oven baked

Site design by AndComp Technologies www.andcomp.com
Copyright 2000 Tech Line Coatings, Inc.